The most obvious feature is the heater and pump
configuration. The heater is plumbed to the suction side of the pump with
a specially made fitting. This allows the pump to be rotated 180° and
reattached to the other end of the heater – instant flow direction
change! This feature alone will streamline the plumbing process on any spa
or line of spas that require numerous plumbing arrangements. The
suction-side plumbing fitting that is supplied with the Power System
utilizes a PVC rubber collar to help isolate any pump vibration and
minimize noise. The pump itself is mounted on generous rubber
bushings for added noise dampening.
The base to which the pump and system box are attached
is made of heavy gauge aluminum and includes numerous mounting locations
adaptable to nearly any portable spa. The mounting
hardware
|
for the system box is easy to reach and allows quick
and easy service on all the components. A look inside the system box gives
no big surprises until you realize that there is no pressure
switch anywhere in the system. There is no vacuum switch either. The M-7™
Power systems use patented and patent pending technology to remove one of
the most troublesome devices in any spa system. No more calibration
problems, no more installing the wrong pressure rating, no more pressure
switch failures – ever. Upon further investigation, it will be found
that there is no sensor mount included with the Power System. In
fact there is no long coil of wire with a temperature sensor attached that
needs to be installed in the tub wall. The same special hardware and
software that eliminated the pressure The mounting hardware for the
system
|
box is easy to reach and allows quick and easy
service on all the components. No drilling a hole in the spa for the
sensor mount, no location questions, no insulation problems, no access
problems for service – ever.
These improvements are the most dramatic changes in
spa equipment since Balboa first developed a reliable electronic control.
Each configuration; M-7A, M-7B, and M-7C can be ordered with several
options including the new Ozone by Balboa. This new ozonator utilizes proprietary
features like the Cool Start ™ electronic ballast
and Fire Ring™ emitters to bring the UV ozone
generation into the new millennium. This technology does not create the
electrical noise of a traditional ballast-type ozone generator. It is this
electrical noise that can cause control system lockups and GFCI tripping.
|
2000LE & 2000 Value Systems
How to Order
Select System Chart
M 7 Power System
Introduction
M
7 Page 2
M 7A Power System
120v/240v, 1hp,
2-Speed
M 7B Power System
240v, 1.5 hp,
2-Speed
M 7C Power System
240v, 2 hp, 2-Speed
M
7 Replacement Parts
M 1 Power System
240v,
Convertible
M 2 Power System
120v, Convertible
M 3 Power System
240v, Deluxe
Lite Leader Power System
Economical
System
Lite
Leader Interior Parts
Outdoor Systems
Outdoor
Interior Parts
Bath Products
Top Side Panels
Panel
Extensions
Heaters
Circuit Boards
Cross
Reference
Fuses
Accessories and Options
|
