|
Any logo = HOME
All
items stocked
HELP Page |
Guillen's Enterprises, Inc.
Your place for:
FLUSHMATE®
GENUINE PARTS
|
-
Buy Online
Now!
-
Same Day
Shipping!
-
No Minimum
-
We Ship
Anywhere
|
|
|
Warning:
Sloan Flushmate Systems do not retrofit the standard gravity fed
toilets |
|
FLUSHMATE TOOLS |
Used on: |
|
|
ST100100
Spud and cartridge removal tool for all Flushmate Pressure Assist Tank |
ALL FLUSHMATE PRESSURE ASSIST TANKS |
| |
|
| |
|
| |
|
New!
retrofit
kit
INTELLI-Flush™ |
|
|
|
_______________________________flushmateparts.com_________________________________ |
|
|
By QuikMate
|
ST100500
CARTRIDGE
REMOVAL TOOL |
FLUSHMATE
CARTRIDGES |
|
The effort of removing
and replacing a cartridge from a SLOAN toilet is cut by ¾ of the time and
assures a clean and successful installation each and every time. ST100500
Cartridge Removal Tool; greatly simplifies the process regardless of any
obstacles present (shelves, handicap rails…). This method does not require
the removal of the cartridge actuator or screw. The tool makes contact with
each of the cartridge fins and assures the required strength to both remove
the old and properly tighten the newly replaced cartridge. A majority of
service calls place on these toilets result in merely the replacement of the
cartridge.
Note:
Six sided 5/8-socket 3/8-drive ratchet
recommended.
|
|
Manufacturers
instructions: Turn off water to toilet and
flush the toilet to remove pressure. Use
ST100500
QuikMate to remove the old cartridge, pour clean water over
female threads to remove any sediment etc. Insert the new cartridge;
push down until cartridge stops. Using the
ST100500
QuikMate, screw the cartridge in until first black female
threads are showing. Turn water on, then screw cartridge 1/4 turn until
water stops. Excessive force can cause damage to the tool and or
cartridge. |
|
|
______________________________flushmateparts.com__________________________________
|
